The AUSubaru.com.au Forums

Hi all,

Been meaning to modify the original air cleaner to fit the Weber. Finally got round to it. Bugger of a job, but boy what a difference to the performance and smooth running.
Some pics to show you how it turned out.

Cheers Rick



[ATTACH]4149[/ATTACH]

[ATTACH]4150[/ATTACH]

[ATTACH]4151[/ATTACH]

A very nice job

do you have a lift kit?

Im curious as to how much room there is when you close the bonnet.

TOONGA

Great pics mate, looks like some awesome work there!

Keep up the good work!

Cheers

Bennie

Thanks guys,
Toonga, I don't have a lift kit mate. I used the Weber aircleaner base as a template, cut it out with a jigsaw leaving enough metal to turn up on the sides. This covered the side gaps on the "hollow" bit. Little bit of spot welding with the old gasless mig, and a bit of "metal" filler. It sits level with the bottom of the aircleaner, so the screw holes almost lined up perfectly. Not quite enough, so I redrilled them. It sits in almost the same position as with the original carby.