truck tech
truck tech
ok so this isnt 100% subaru based, but subaru drivers come from all walks of life so it seems fair to put it here and see about a response.
Im in need of a truck/transporter for a few things and as most of you know i like to be difficult and different. The truck will have to carry at least 2 cars, 1 on the bed 1 on a trailer, and these could be quite varied so it has to be pretty versatile, were talking my play car, my brothers rally car, my brother drift car, my offroad thats almost in the works and probably many others. It will also have to take a side loading grain tank and water tank for around the farm
Engine wise it has to be able to do 110 fully loaded (maybe 100 but ill look at laws late) cause i hate seeing people driving trucks on the highway at 80 cause thats all their town delivery trucks can do. So im looking at a diesel, maybe biodesel or better yet used cooking oil, turbo or supercharged again unsure about that.
Body will be the cab off an old dodge that i found in reasonable nick, not sure about chassis though maybe have to build one to my needs and get it engineered and all that jaz.
Any comments??
Im in need of a truck/transporter for a few things and as most of you know i like to be difficult and different. The truck will have to carry at least 2 cars, 1 on the bed 1 on a trailer, and these could be quite varied so it has to be pretty versatile, were talking my play car, my brothers rally car, my brother drift car, my offroad thats almost in the works and probably many others. It will also have to take a side loading grain tank and water tank for around the farm
Engine wise it has to be able to do 110 fully loaded (maybe 100 but ill look at laws late) cause i hate seeing people driving trucks on the highway at 80 cause thats all their town delivery trucks can do. So im looking at a diesel, maybe biodesel or better yet used cooking oil, turbo or supercharged again unsure about that.
Body will be the cab off an old dodge that i found in reasonable nick, not sure about chassis though maybe have to build one to my needs and get it engineered and all that jaz.
Any comments??
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
i was genuinly thinking that
But yeah how much are they for a running one that i can build to what i want?
But yeah how much are they for a running one that i can build to what i want?
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ
ive been given 20 grand to play with currently but the cheaper the better i guess
i might go see steve and see whats the go, if its not in my budget (chances its not) well ill ssee about a test drive at 100 with a trailer on the back
theres a guy just up the road from me who has a loaad of old army gear and i think there are some unimogs in therw
i might go see steve and see whats the go, if its not in my budget (chances its not) well ill ssee about a test drive at 100 with a trailer on the back
theres a guy just up the road from me who has a loaad of old army gear and i think there are some unimogs in therw
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
Unimogs are the SHIZ!
3rd gear accelerator-less hillstart? YES PLEASE!
the diesels are good for 500k without serious faults, just check service history if any.
MB used to make bulletproof engines, the 110 straight six for example? sounds like a truck
and just as durable. a rediculous petrol engine.
parts will cost a bit but hopefully will be ok.
UNIMOG
older the better!
Cheers
3rd gear accelerator-less hillstart? YES PLEASE!
the diesels are good for 500k without serious faults, just check service history if any.
MB used to make bulletproof engines, the 110 straight six for example? sounds like a truck
and just as durable. a rediculous petrol engine.
parts will cost a bit but hopefully will be ok.
UNIMOG
older the better!
Cheers
yeah ill see what i can get from up the road if hes willing to sell
we need to get more odd subaru rally cars going, get your beast rolling H-top
we need to get more odd subaru rally cars going, get your beast rolling H-top
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
There was one made in WA can't remember the name (ocko? Ocker?) it looked like a unimog, but Perkins diesel engine, go just about anywhere, a lot of tour coach people use them to go take tourists over the sandhills, my neighbour has one he reckons they are great. the unimogs are getting a bit long in the tooth now, and would I imagine cost a big buck to rebuild, being mercedes.
if its the ocker that im thinking of my dad knows it well
They used to use them as recovery vehicle for either the redex/repco trial or the aus safari. They go anywhere......... Slowley
I dont know how one would go fully loaded when i asked for 110
They used to use them as recovery vehicle for either the redex/repco trial or the aus safari. They go anywhere......... Slowley
I dont know how one would go fully loaded when i asked for 110
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Unimog would be my first choice but they aren't cheap.
If you can find the OKA ( http://www.oka.com.au/ ) around the traps then make sure it's a good one as parts are hard to get hold of.
edit: here's some OKAs for sale.. http://www.carsales.com.au/all/aus/oka/
If you can find the OKA ( http://www.oka.com.au/ ) around the traps then make sure it's a good one as parts are hard to get hold of.
edit: here's some OKAs for sale.. http://www.carsales.com.au/all/aus/oka/
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
unimog or the OKA would be awesome so its going to have to take some looking and thinking about them whether i can find one in the price range thats good for my needs
the other option and possibly the more likely option is the dodge bitsa with a turbo deisel engine or somthing with our own body and chassis
ANOTHER option thats come up is a very old 60/70s? (seems it by the condition) toyota landcruiser long tray it needs a lot of work but then so does building a dodge bitsa =)
the vortex H-top put all the good bits you kept out of the AX7 in and lets go
the other option and possibly the more likely option is the dodge bitsa with a turbo deisel engine or somthing with our own body and chassis
ANOTHER option thats come up is a very old 60/70s? (seems it by the condition) toyota landcruiser long tray it needs a lot of work but then so does building a dodge bitsa =)
the vortex H-top put all the good bits you kept out of the AX7 in and lets go
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
- phillatdarwin
- Junior Member
- Posts: 532
- Joined: Thu Dec 25, 2008 6:11 pm
- Location: 93GL / 86rx ea82t Darwin NT
i wood not want a ocker work on them and there in to much parts that u can only buy from them at big price it just like if u buy a MACK or a KW pay $$ for the name .. and trying to get any thing old and slow do 110 i hope u do well .. get a old bedford good old truck with a bit of late model runing gear that wood be goodtony wrote:There was one made in WA can't remember the name (ocko? Ocker?) it looked like a unimog, but Perkins diesel engine, go just about anywhere, a lot of tour coach people use them to go take tourists over the sandhills, my neighbour has one he reckons they are great. the unimogs are getting a bit long in the tooth now, and would I imagine cost a big buck to rebuild, being mercedes.
the CFA in vic sell there old fire trucks that are 4x4 u wood get one of them for a bit more then u want to spend if had $100,000 could build a cool rig
yeah im a bit weary about paying for the name
There are some really nice old style ford lt 9000 coming through work and yeah i reacon one of them would be perfect but yeah cost and availability.
So phils on the same page as me, an old bedford or the dodge in my way with modern running gear probably Izusu or mitsubishi but ill see what i can find
There are some really nice old style ford lt 9000 coming through work and yeah i reacon one of them would be perfect but yeah cost and availability.
So phils on the same page as me, an old bedford or the dodge in my way with modern running gear probably Izusu or mitsubishi but ill see what i can find
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
found somthing the other day
While looking through the photos of my hondas i rememberd that the guy i brought them off had a mercedes truck that he purchased to do the same thing i want to
Im planning on talking to him and seeing if hes interested in letting me build what i want and letting him keep and use it but so i can use it when i need
While looking through the photos of my hondas i rememberd that the guy i brought them off had a mercedes truck that he purchased to do the same thing i want to
Im planning on talking to him and seeing if hes interested in letting me build what i want and letting him keep and use it but so i can use it when i need
if im needed for anything [email protected] and ill try and get back to you.
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs
pickstock racing fabrication
pickstock racing photography
GETDIRTYCLOTHING
track day classics and customs