EJ dizzy option ??

steptoe · Post by **steptoe** » Sat Aug 21, 2010 10:50 am

A dizzy was staring me in the face yesterday SMACK and wondered if it was a possible option for fittting to an EJ like TOONGAs etc. 10/94 Daihatsu Feroza 1600cc has 110mm between bolt centres, is 120mm from mating face to tip of cap, vac advance cannister underside and what struck me - leads out the top side as opposed to the top like normal MkIII Escort dizzy used. It is a DENSO unit part number 100291 - 2615 with a big 04 nearby. Did not get to see the important cam slot mating bits so still useles pondering here on my part

Uploaded with ImageShack.us

Used Forum Code on imageshack for the big pic (note to self)

Post by **TOONGA** » Sat Aug 21, 2010 11:09 am

the other option I looked at was a distributor from a 2.2 litre mazda it is in a neat pile of stuff at RSR preformance waiting for me to come and get it.

this is what it looks like

it would need an adaptor made to fit it to the EJ head but a lathe and a drill press would sort that out

TOONGA

T'subaru · Post by **T'subaru** » Sat Aug 21, 2010 11:34 am

I hear there is a great clearence sale going on right now:D

RSR 555 · Post by **RSR 555** » Sat Aug 21, 2010 4:06 pm

lol.. yeah.. stuff it going cheap.. like it's owner

Jonno.. I found this pic on the web of a Applause dizzy (which run the same HD 1.6 engine) but the cap will be different due to north/west or east/west configuration. As you can see that shaft piece in the engine side would need to be removed.

http://www.japanautoteile.de/parts/file ... d_3236.jpg

Post by **TOONGA** » Sat Aug 21, 2010 4:31 pm

T'subaru wrote:I hear there is a great clearence sale going on right now:D

yeah Im looking at a fire sale next time Im in Perth

RSR 555 wrote:lol.. yeah.. stuff it going cheap.. like it's owner

Jonno.. I found this pic on the web of a Applause dizzy (which run the same HD 1.6 engine) but the cap will be different due to north/west or east/west configuration. As you can see that shaft piece in the engine side would need to be removed.

http://www.japanautoteile.de/parts/file ... d_3236.jpg

not a bad dizzy apart from that nub, wouldn't that act as a balancer?

TOONGA