MAZ626 seat in Brumby
Posted: Mon Jun 21, 2010 7:40 pm
pics to follow
http://img64.imageshack.us/img64/5682/m ... brumby.jpg
this is a link (must find picture link - done it before? - maybe photobucket) to the top of the seat, nice velour, matching grey, comfy , gut hugger adjustable
,ImageShack.us
Uploaded with ImageShack.us another of the same pic, so far, see the L plate? Ah, ha, see that Adrian? I Ctrl C'd the Forum thumbnail link[B/] and pasted it here to fit picture in !!
As I piece this together
Uploaded with ImageShack.us Obviously , this is the lower half
I stuffed around with this fit TWO YEARS AGO trying to use height adjust and back forwards adjust to find hair touching roof lining, too high. Put seats away for a while, (actually had ideas of sellng them as half finished project to a shorter Brumby owner but he 'went missing') got them out again, ripped giblets out from underneath and was able to bolt to 25mm SHS tubes just the correct distance apart to mate up with standard rail spacing. Put them away, well one anyway, tripped over the other for a year
, by this time forgetting my plan to just fit adjustable front back sliderss to the seats. I fitted them up with no adjustment at all, so went slowly this time to make it all fit ME. If anyone ever fulfils my request for a shorter blonde woman that gives no cheek I may need to rethink adding sliders again.
MAZ626 / Ford Telstar Ghia 1988 - 1990
In my next life I may just look for KF Laser TX3 seats as all KF Laser seats are said to be bolt in bar elongating one mounting hole
I still have the LHS to do. May just remove seat and make up a jig to fit original seat with mounting holes in correct spot out of 38x19 pine DAR and ensure that the new LHS seat fits that jig, or go cut a floor out of another Brumby !!
http://img64.imageshack.us/img64/5682/m ... brumby.jpg
this is a link (must find picture link - done it before? - maybe photobucket) to the top of the seat, nice velour, matching grey, comfy , gut hugger adjustable
,ImageShack.usUploaded with ImageShack.us another of the same pic, so far, see the L plate? Ah, ha, see that Adrian? I Ctrl C'd the Forum thumbnail link[B/] and pasted it here to fit picture in !!
As I piece this together
Uploaded with ImageShack.us Obviously , this is the lower half
I stuffed around with this fit TWO YEARS AGO trying to use height adjust and back forwards adjust to find hair touching roof lining, too high. Put seats away for a while, (actually had ideas of sellng them as half finished project to a shorter Brumby owner but he 'went missing') got them out again, ripped giblets out from underneath and was able to bolt to 25mm SHS tubes just the correct distance apart to mate up with standard rail spacing. Put them away, well one anyway, tripped over the other for a year
, by this time forgetting my plan to just fit adjustable front back sliderss to the seats. I fitted them up with no adjustment at all, so went slowly this time to make it all fit ME. If anyone ever fulfils my request for a shorter blonde woman that gives no cheek I may need to rethink adding sliders again.MAZ626 / Ford Telstar Ghia 1988 - 1990
In my next life I may just look for KF Laser TX3 seats as all KF Laser seats are said to be bolt in bar elongating one mounting hole
I still have the LHS to do. May just remove seat and make up a jig to fit original seat with mounting holes in correct spot out of 38x19 pine DAR and ensure that the new LHS seat fits that jig, or go cut a floor out of another Brumby !!