The AUSubaru.com.au Forums

Hi Sub Fans: I have an age old problem with no clear answer. What's involved in fitting WRX rims to a 88 Brumby?

The search function up the top should bring up a few threads on the subject. Best way is to contact Jeff directly at crossbred performance.



http://www.crossbredperformance.com/

So in other words the cheapest and easiest way is buy one of jeffs kits then you get bigger and better brakes as well. But if you just want the wheels it might be worth looking for some Peugeot four stud wheels like these as well as the subaru ones.

Sorry about the picture quality!

i never seen much here mentioned about 6 stud navara rims. apparently 2 holes line up and you need to drill the other 2 in the rim or the other 4 in the hub, and navara are the correct offset. havent done this myself tho