The AUSubaru.com.au Forums

Posted: **Thu Jun 18, 2009 11:34 am**

hi all
i are new hear
can some one out there tell me how to make a steering link mod for a "4" lift kit as i have look all over the place in this place and can not find anything as i need to know as i want it to past rego if i do it .
car is a L series
if some one out there has made one i wood like some info on how to do it .

Posted: **Thu Jun 18, 2009 12:44 pm**

usually it is just an extended peice if rod welded between the 2 uni joints that connect the steering column and the steering rack

Posted: **Thu Jun 18, 2009 1:49 pm**

so u are saying just cut the 2 uni joints out and just weld in a longer piece of round bar a bit longer .

Posted: **Thu Jun 18, 2009 1:53 pm**

wear did u get the 130 watt light from ?

Posted: **Thu Jun 18, 2009 4:49 pm**

thats the one!

umm were just some narva driving lights with 130w globes in them

Posted: **Fri Jun 19, 2009 12:14 pm**

my engineer said cut rod and insert ends in pipe to lengthen and crack test.