Page 1 of 1
Need EA82 NA MPFI 87+ cams .
Posted: Wed Apr 15, 2009 4:09 pm
by discopotato03
Hi all , I need a good pair of 87+ EA82 MPFI NA camshafts .
No EFI cars at the wreckers ATM so if anyone wants to sell them too me please let me know .
Cheers A .
Posted: Wed Apr 15, 2009 7:31 pm
by SCOOBIDOO
I have a pair...from a twin port efi n/a engine i just used for bits..a2 a7 is that what you want?
Posted: Thu Apr 16, 2009 11:12 am
by BlackMale
Oh are you for real... just binned some in the last few weeks as i really had no need for em. Sorry Buddy. If i find any more i'll let you know however i think i only had 1 set.
Posted: Thu Apr 16, 2009 11:18 am
by AndrewT
Check with Pete (Coupe) from Perth. He bought two n/a MPFI motors off me with the intent of mixing them together with some of his other turbo motors I think to make a good one. He will likely have lots of leftovers. Both motors were from 1989 touring wagons.
Posted: Thu Apr 16, 2009 12:25 pm
by discopotato03
They are identified by having 1 ring on the smallest diameter section of the camshaft ("B") section , and 2 rings on the slightly larger diameter ("C")section directly behind the B section .
Sections B and C are between the second and third cam lobe .
Cheers A .
Posted: Thu Apr 16, 2009 9:54 pm
by SCOOBIDOO
there good to go,or are you still looking? these are 9 month 89 cams and mike up as new..
Posted: Fri Apr 17, 2009 9:50 am
by discopotato03
Yes I think they would do nicely , just let me look up an 89 WSM I have saved and double check that they didn't change between 87 and 89 .
Cheers A .
Posted: Fri Apr 17, 2009 3:19 pm
by discopotato03
Actually there may be a problem , I got the Subaru parts people to cross reference the 87/88/89 MPFI NA camshafts and the part numbers of the 88/89cams are different from the 87's .
I don't suppose anyone has an Australian spec 88/89 Factory WSM to look the late cam specs up in ?
May have to hold out for 87 MPFI NA cams .
Cheers A .