Another EJ22 and loom "bench" test

[El_Freddo]

So, I'm at it again

Here's my second EJ conversion first start up in my makeshift testing "facility", pretty much bang on 10 years since doing the one for Ruby Scoo.

https://youtu.be/vBXrmIzWiZY

And back in 2009:

https://youtu.be/CUjKbPrZDLM

Needless to say, I'm pretty happy with this result!

More on it later, probably in the appropriate build thread

Cheers

Bennie

[TOONGA]

Bennie nicely done I have to do this to an EJ18 eventually.

I will probably go this way if I can find a broken gearbox

(not my image)

If not I have a box sitting on the ground here I can bolt my engine up to

TOONGA

[El_Freddo]

Thanks mate.

My only concern with mounting the starter like that is you expose the flywheel. I can be a little OHS over the top at times but I think it easy to overcome. Plus you’d need to have an eight bolt engine for this to work, or shave the bell housing down to include the lower stud.

Cheers

Bennie