door seals

red_rocket · Post by **red_rocket** » Wed Jul 29, 2009 7:43 pm

i have an 89 touring wagon and the door seals are well on there way out. Looking to get the whole car done just give her some more life.
ANy one in perth recommend someone to do this or is it easy enough to do yourself???
cost involed? cheers

guyph_01 · Post by **guyph_01** » Thu Aug 13, 2009 3:06 am

It should not be hard to do yourself. I did the ones on my liberty and i think the L are similar. Rarespares in perth would have the seals but you would get them from the wreakers or even cheaper from the quokka if ppl are seperating parts off there cars

red_rocket · Post by **red_rocket** » Thu Aug 13, 2009 6:27 pm

ok thanks, will search there

guyph_01 · Post by **guyph_01** » Thu Aug 13, 2009 9:02 pm

I might be getting a L series as spares for my car, if you still need the seals let me know.... Not sure what they are worth tho. I'll try and find out:)

red_rocket · Post by **red_rocket** » Fri Aug 14, 2009 12:00 am

if they are in tact i would be happy to check em out...heard they are free these days...

GOD · Post by **GOD** » Fri Aug 14, 2009 12:49 am

I have a few spare doors sitting in Perth. From memory there's two LHFs and both rears. You can have all the seals you want for a six pack of teds, if you can collect tomorrow (Friday 14/8 ) arvo or Saturday morning.

0401 471 144

Dane.

Gannon · Post by **Gannon** » Fri Aug 14, 2009 6:22 am

Try Clark Rubber and Foam http://www.clarkrubber.com.au/

They have a wide variety of that kinda thing