Front Seats in MY Leone Coupe

Rabbitoh · Post by **Rabbitoh** » Sun Jan 11, 2009 4:31 pm

Has anyone got rid of the Leone front seats and replaced them with better seats Subaru type or other if so what did you put in, I'm thinking of doing something.

Gannon · Post by **Gannon** » Sun Jan 11, 2009 5:07 pm

Somebody said that Mazda 626 or 929 seats fit in MY's

dfoyl · Post by **dfoyl** » Sun Jan 11, 2009 8:37 pm

Mazda 929 I have heard. Or MX5 with some minor mods.

The stock MY Touring wagon seats are pretty good with adjustable lumbar, certainly far better than a lot of other car manufacturers stock seats. MY Touring wagons aren't real easy to find anymore though...

Dean.

GOD · Post by **GOD** » Sun Jan 11, 2009 11:31 pm

Not sure if this applies to MYs, but I recently found that it's dead easy to remove the metal frame from the seat cushion in an L Series, and it fits straight into the cushion of a Liberty seat. Original frame -> original seat rails -> seat goes in original position, without having to fabricate mounts.

Dane.

maxxair · Post by **maxxair** » Mon Jan 12, 2009 1:01 pm

ive fitted wrx seats into my brumby. the front bolt holes werent a problem, the rear i bolted to the tunnel and the floor. not a factory look, but fit sweet.

Phizinza · Post by **Phizinza** » Mon Jan 12, 2009 2:51 pm

late 80's Astra seats are suppose to go in pretty easy.

Rabbitoh · Post by **Rabbitoh** » Mon Jan 12, 2009 5:07 pm

GOD wrote:Not sure if this applies to MYs, but I recently found that it's dead easy to remove the metal frame from the seat cushion in an L Series, and it fits straight into the cushion of a Liberty seat. Original frame -> original seat rails -> seat goes in original position, without having to fabricate mounts.

Dane.

Yes Liberty seats do fit straight in the L series frame. Did that with my L series Leone before fitting RX Turbo Lseries seats. Was curious if you could do the same with Liberty seats to a GLF Coupe or perhaps Vortex seats or RX Turbo seats to thew MY seats metal floor frame.