The AUSubaru.com.au Forums

Posted: **Wed Jun 20, 2007 7:15 pm**

I bought a new disty cap for my ea82t, 4plug, but it doesnt fit.
The i have now is a hitachi, and the one i bought is a bosch, and according to the catalogue, its the right one. Both have screws (not clips) but the new one is slightly smaller.
Anybody had this problem?

Posted: **Wed Jun 20, 2007 10:10 pm**

Yes, for the EFI EA82's there are 3 differnt caps 1 for the early 3 plug, one for the early 4 plug, one for the late 4 plug and none of them are interchangable. Best bet is to take your old one into Repco as they usually have them in stock.

Posted: **Wed Jun 20, 2007 10:33 pm**

Bosch package don't mean it only fits Bosch for starters (trust you figured that)
my champion chart got JP630 for 83 to 88 ohc (efi/carb not specfied) JP594 for 85 to 87 RX turbo efi and vortex, JP648 is for Denso dizzys. The Bosch part number should share the same 3 digits

rotor buttons different too!

Posted: **Thu Jun 21, 2007 4:11 pm**

Ok, i will go back to the parts guy with this info

Thanks

The AUSubaru.com.au Forums

New disty cap doesnt fit

New disty cap doesnt fit