Page 1 of 1
ej20 ecu imobiliser circuit
Posted: Wed Apr 25, 2007 2:56 pm
by rwhite
I have a genuine ecu from an australian 2002 impreza for my ej20 sohc eng to go into my l series wagon & need help to by pass the imobiliser system as I dont have the imobiliser ecu or the ignition switch/key/reader How can I trick the ecu so it will supply pulses to work the injectors ?
regards rob
Posted: Wed Apr 25, 2007 5:55 pm
by Outback bloke
Simple answer is you can't. Well not that I have found yet any way. We did a conversion just recently with a similar motor and we mucked around with it for a while seeing if you can bypass it.
Posted: Wed Apr 25, 2007 7:45 pm
by Oversteer
you need the key barrel&key from the car....or you can buy a new key and get subaru to re-program if you don`t have the original key...costly exercise but !
You don`t need to use the impreza key&barrel/transducer but you need it wired in tucked undr dash.
OS