L-Series VSS signal MPFI

How to fix gremlins & general maintenance issues ...
Post Reply
User avatar
L-Rex
Junior Member
Posts: 56
Joined: Tue Sep 18, 2018 6:03 am
Location: Wollongong, NSW.

L-Series VSS signal MPFI

Post by L-Rex » Thu Sep 27, 2018 3:18 pm

Hi all,

Does anyone have a wiring diagram showing the pinouts from the MPFI dash?

I'm looking to pick up the VSS signal from the reed switch...
L-Rex

1992 L-Series Wagon, which used to be EA82 auto.

User avatar
El_Freddo
Master Member
Posts: 12486
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Re: L-Series VSS signal MPFI

Post by El_Freddo » Sun Sep 30, 2018 9:48 pm

I'm using it and it works a treat.

Check out the EJ into L series thread in the conversions page, it's detailed in there. I'd link it here if I was on the computer, but I'm just returning from the bush ;)

Cheers

Bennie

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Re: L-Series VSS signal MPFI

Post by Gannon » Tue Oct 02, 2018 7:26 am

Is there no attachment upload anymore?

According to my diagram, its the Yellow/red wire at the back of the instrument cluster. It is also at the black 21 pin plug under the dash (there are 3 big plugs grouped togerther, white, black and blue) on the body side of this plug it is Yellow/green and is also the Yellow/green wire at the "check connector" behind the drivers side strut tower

Post Reply

Return to “Electrical, Wiring and Lighting”