Page 1 of 1
ECU Explorer, ECUFlash, OBD Cables
Posted: Sat May 27, 2006 12:38 am
by mattims
has anyone played with any of these bits of software before?
i currently have ecuexplorer running as datalogging and have downloaded the flash from my ecu and made some sense of a couple of maps in ecuflash but im having trouble finding the main ones (like fuel, ignition, boost) just wondering if anyone else has been here already?
This is on my Lib B4 2001 (MY02) AG850-3382 is the ecu model.
Posted: Sat May 27, 2006 3:47 pm
by BrennyV
my mate also has a b4, and i dont know of anyone who has realy played with it b4. tho if you talk to alex at rms im sure they can put you in the right direction as they do have some one who i was told had played with b4's ecu maps
Posted: Sat May 27, 2006 5:51 pm
by Captain Obvious
have a look and maybe ask on the rs forum??
Posted: Sat May 27, 2006 8:54 pm
by mattims
have you got any contact details for rms?
once i figure out the maps i would be most likely looking for someone to dyno tune it anyway.
Posted: Sat May 27, 2006 11:39 pm
by Chris_Rogers
links to software
...
what ecu will it read ? (94-98 GT?)
Posted: Sun May 28, 2006 8:25 am
by Craigus
Posted: Sun May 28, 2006 1:23 pm
by mattims
not sure on the years it will read.
The one i am using is ecuexplorer from
http://www.tari.co.za/cgi-bin/yabb2/YaBB.pl
and ecuflash from
http://www.openecu.org/
the cable im using is from tactrix
http://www.tactrix.com/
Posted: Sun May 28, 2006 2:21 pm
by Chris_Rogers
thinking laterally - if it will read yours then it should read mine is your OBD2 or does it have the grey consult port on it?
I saw someone metion on the ecuexplorer help area that they are also wanting to red/modify the ECU that I have. (All I want to do os raise the boost to 10 psi.)
Posted: Sun May 28, 2006 4:01 pm
by BrennyV
Revlimit Motor Sport Service Centre
Leigh Hynes or Alex Friedrich
Unit 3/38 Cohn Street
Carlisle
WA
Australia
6101
[email protected]
(08) 9470 2444