Page 1 of 1
Brumby Advice - Power windows, Central locking
Posted: Sun Oct 27, 2013 9:23 pm
by neo__04
Hey all,
Starting my brumby project car and am chasing some advice if possible.
Looking at putting power windows into it and have read a few tutorials on here.
It said to get MY electric window regulators.... Are they off a particular model/years? Im gonna head to the wreckers to chase them up, just wanted as much info as I could get so they can find me what i need.
Also, can't seem to find any information on fitting central locking.
Anyone able to shed some light on this?
Thanks heaps
Posted: Sun Oct 27, 2013 11:44 pm
by RSR 555
There's a few ways to do the power window setup. Personally I think the kit that Jay-Jay (60766244) has done to his old girl Maple (Brumby), as the genuine regulators will be harder to find.
As for the central locking, just pop into your local Jaycar store and grab a universal kit. They are really simple to fit and can be connected to you remote immobilizer system. If you need one of them too.. ask while you're at Jaycar
Posted: Mon Oct 28, 2013 4:07 pm
by neo__04
thanks for that. chased up both those things and am all organise. now for engine questions in the right forum area
Posted: Mon Oct 28, 2013 5:30 pm
by Silverbullet
I think the "Rapid Electronics" electric window kit is what you're after for aftermarket. I've got the 4 door kit but haven't installed it yet, everything is solid and looks pretty good quality wise and even comes with all the wiring and switches. I was thinking of using a touring wagon center console and butchering the switches to run the aftermarket windows but that's just another thing on the list at the moment
Posted: Tue Oct 29, 2013 1:37 pm
by neo__04
Just ordered that kit for the power windows and also their kit for the remote central locking. Just gotta get the new speakers for the doors and do three jobs in one
Posted: Fri May 29, 2015 2:39 pm
by suba2
Hi I took the electric window regulators out off the doors and the swicthes out of a sportswagon is there any other part's I would need excecpt for the wiring already scrapped the rest of the car
to put into my brumby?
Posted: Fri May 29, 2015 10:04 pm
by henpecked
these are the two threads that are relevant if you are using regulators and switchgear out of a MY Touring wagon ( 81-84)
http://www.ausubaru.com.au/showthread.php?t=10900
http://www.ausubaru.com.au/showthread.php?t=20684
If you are going aftermarket here is silverbullets thread and video
http://www.ausubaru.com.au/showthread.php?t=25568