The ***ALL NEW*** AUSubaru.com.au Forums

Ok - I've read through most of that & here is what I've got up to for now :



I went to the wreckers to find all the relavent bits ...



Then set about testing to make sure it all works ...

Note 1: The black module + blue plug ( the 'Brain' next to multimeter, it's usual home is located under dash - attached to hood release ) in the photo is what controls it all & makes it a lot easier to plug & play ...

Note 2: The Relay + Resistor with white plug ( it's usual home is under drivers seat ) is also required to keep it all running smoothly ...

Note 3 : The Auto Switch ( normally located on driver's door ) although not Essential, does make for a nice feature when combined with a central locking module on alarm system ...

Unfortunately that's as far as I got before having to move, I will have a go at the rest when I'm able to ...

I found some useful info on power windows :





Will keep in mind for next project ...

Cheers, Bantum ...

So where are you at with this now? Your post in September shows you've all the gear you need - did you actually get it done or is it all still in storage?

Cheers

Bennie

Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ...

I'm hoping to get back to it soon though, alternatively I could get my Brumby shipped here ...

Cheers, Bantum ...

Bantum wrote:Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ...

Mate that's rough! While my subi's are in the back yard my parts stash/bombs are almost a 2hr drive away and I find it frustrating! But I really can't complain compared to your situation.

I hope you get it closer to you soon!

Cheers

Bennie