Brumby Electric Widows

How to fix gremlins & general maintenance issues ...
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

More Details ...

Post by Bantum » Mon Sep 03, 2012 6:13 pm

Ok - I've read through most of that & here is what I've got up to for now :

Image

I went to the wreckers to find all the relavent bits ...

Image

Then set about testing to make sure it all works ...

Note 1: The black module + blue plug ( the 'Brain' next to multimeter, it's usual home is located under dash - attached to hood release ) in the photo is what controls it all & makes it a lot easier to plug & play ... :D

Note 2: The Relay + Resistor with white plug ( it's usual home is under drivers seat ) is also required to keep it all running smoothly ... :!:

Note 3 : The Auto Switch ( normally located on driver's door ) although not Essential, does make for a nice feature when combined with a central locking module on alarm system ... :)

Unfortunately that's as far as I got before having to move, I will have a go at the rest when I'm able to ... :(

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Update ...

Post by Bantum » Thu Feb 27, 2014 3:39 am

I found some useful info on power windows :

Image

Image

Will keep in mind for next project ... ;)

Cheers, Bantum ...

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Feb 27, 2014 8:23 pm

So where are you at with this now? Your post in September shows you've all the gear you need - did you actually get it done or is it all still in storage?

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Sad ...

Post by Bantum » Thu Feb 27, 2014 8:40 pm

Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ... :cry:

I'm hoping to get back to it soon though, alternatively I could get my Brumby shipped here ... ;)

Cheers, Bantum ...

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Feb 27, 2014 8:48 pm

Bantum wrote:Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ... :cry:
Mate that's rough! While my subi's are in the back yard my parts stash/bombs are almost a 2hr drive away and I find it frustrating! But I really can't complain compared to your situation.

I hope you get it closer to you soon!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply

Return to “Electrical, Wiring and Lighting”