00 outback HVAC auto control panel
Posted: Wed May 11, 2011 6:58 pm
Hey guys. Its odd, but both the "auto" and "off" buttons an my aircon panel have stopped working. First the auto button, then the off button after a few days. All the other buttons, the fans and compressor all work fine. I tried the self test but of course that needs the auto and the fresh/recirc button to be held down... so that doesn't work. And the t/shooting for the self test (checking the power and ground pins) all checked out.
I tried to pull the controller apart, but i couldn't get to the auto/off switches. Everything else is accessible, though and looks fine. It seems to me that the switches themselves are the problem, but i can't be sure until i can get to the damn things!
Has anyone else had this problem? If so, how did you fix it?
I tried to pull the controller apart, but i couldn't get to the auto/off switches. Everything else is accessible, though and looks fine. It seems to me that the switches themselves are the problem, but i can't be sure until i can get to the damn things!
Has anyone else had this problem? If so, how did you fix it?