The AUSubaru.com.au Forums

Posted: **Fri Jun 13, 2008 1:52 pm**

Can someone give me a shout out for what sorta resistance readings i should be getting for the plug leads on a ea82 carby engine?

3 of the 4 range from 5-7k ohms, and the 4th (the longest) is reading around 13k ohms.

Is this high?

Cheers,

Andy

Posted: **Fri Jun 13, 2008 6:28 pm**

3-8k ohms per foot is acceptable, you can get better quality leads with a spiral inductive core 50-150 ohms per foot, they still have RF suppression.

Posted: **Fri Jun 13, 2008 7:17 pm**

alright cheers bud, well without the limits then.

Ticks another option off the "possible causes" checklist

Posted: **Fri Jun 13, 2008 9:06 pm**

get your leeds from queensland ignition leeds located in kallanger north side,he will make then while you wait,9mm thick good resistance.

The AUSubaru.com.au Forums

Ignition lead resistance ea82.

Ignition lead resistance ea82.