I have the Subaru Liberty B4 or legacy twin turbo.
I purchased the vehicle with the inlet manifold removed.
just need to make sure I'm putting the right injector plugs in.
can anyone tell me what is the color of the wires in the plugs?
both wire plugs are pretty stretched I believe they both will fit either plug.
are the plugs in the right places?
don't no how to ad pictures so hope this helps
thanks
https://imgur.com/mcgDWND
https://imgur.com/y8H7V0o
injectors
- El_Freddo
- Master Member
- Posts: 12562
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Re: injectors
G’day Subaru Mad,
Are you asking which plug is the one for the cam sensor?
Try comparing wiring colours on the other side to see if they’re the same as what you have on the LHS bank. The odd one out will be the cam angle sensor.
Alternatively, download a FWM/FSM (factory workshop manual/factory service manual) and look up the details in that. There are some good ones out there with clickable links to drop you exactly where the info is in the document rather than scrolling to the page. Don’t pay for them as the can be found free online.
Cheers
Bennie
Are you asking which plug is the one for the cam sensor?
Try comparing wiring colours on the other side to see if they’re the same as what you have on the LHS bank. The odd one out will be the cam angle sensor.
Alternatively, download a FWM/FSM (factory workshop manual/factory service manual) and look up the details in that. There are some good ones out there with clickable links to drop you exactly where the info is in the document rather than scrolling to the page. Don’t pay for them as the can be found free online.
Cheers
Bennie