2008 Impreza 2.0R ECU pinouts

elvicjhann · Post by **elvicjhann** » Sun May 10, 2009 3:16 am

I've been looking for an ecu diagram for the 2008 impreza for months now and still haven't come up with anything

So far we've been able to figure out the most we need to install a GReddy E-manage Ultimate

The only thing were missing is the RPM pin, Throttle sensor, and Speed sensor

I'm not from Australia but I've heard that the Impreza there and here in the Philippines are the same, with an EJ204 engine (according to the user's manual)

Pics of the ECU:

Located under the floor mat of the front passenger

If anyone can confirm that it is the same? Thank You

Also because I think it'll be hard to get a complete diagram of this ecu maybe you guys can tell me a way on how to find the the certain pins we need to get the job done

If someone can help us. THANK YOU. I'll make a write up of the whole think once were done to help those that maybe thinking about installing a piggy

Gannon · Post by **Gannon** » Sun May 10, 2009 8:11 pm

Just curious, why are you putting in an E-manage in a non turbo car?

elvicjhann · Post by **elvicjhann** » Mon May 11, 2009 9:16 pm

Just to tune it a bit... I know it wont have much gain but it'll still be faster

Anyways... I'm still saving for a turbo installation its just that i was able to buy the emanage now

log1call · Post by **log1call** » Thu May 14, 2009 5:55 pm

Tried here....
http://www.northursalia.com/modificatio ... iring.html

elvicjhann · Post by **elvicjhann** » Thu May 21, 2009 3:53 pm

log1call wrote:Tried here....
http://www.northursalia.com/modificatio ... iring.html

I've seen that page before, but the model I need isn't there aswell. Thanks anyway.

Anyways, We've found the speed and Tach pins only thing left is the throttle maybe if you guys know of a way how we could find it?

Mine doesn't use the cable type, its electronic thats why were having a hard time finding it