Page 1 of 1
Tailshaft / uni joints
Posted: Fri Apr 20, 2007 11:48 am
by Point
took my brumby for a rwc the other day and one thing I was knocked back on was play in the uni joints. on closer inspection it looks to me that the uni joints are the non replaceable type. ( I gather you can tell by if there are clips holding them in? ). I did a quick search and it seems that they can be converted to the replaceable type, but the cost is a bit high. so my question is, can I swap it for another tailshaft with replaceable joints (earlier model?) and if I can't find a brumby one, will the wagon ones fit?
failing that does anyone near townsville have a tailshaft they don't want?
Posted: Fri Apr 20, 2007 9:56 pm
by Point
all sorted...the circlips are on the inside
Posted: Sat Apr 21, 2007 2:55 pm
by AndrewT
Glad its sorted. For future reference the tailshaft place I've used here in Perth charges $100 per uni joint to replace the "non-replaceable" type with new replaceable ones.
Posted: Sat Apr 21, 2007 8:29 pm
by Alex
i'll have to grab the name of this place off ya andrew...i seem to be having sum tailshaft issues too..
alex
Posted: Sun Apr 22, 2007 7:27 pm
by steptoe
AndrewT , do you have a part number for the uni joints used in this case ?
Posted: Sun Apr 22, 2007 8:13 pm
by AndrewT
no sorry I dont, they are the ones the tailshaft dude thought best. I didn't think to become that involved in the process.
Although I think I will next time because one of them has started to flog out again....I'm going to look into getting them to put something more substantial in.
Posted: Tue Apr 24, 2007 10:02 am
by steptoe
one of my L series uni looks machined out coz has circlips and is RUJ 1781 from a nissan - if that helps