Page 1 of 1
Need a rebuid kit
Posted: Sat Oct 14, 2006 9:00 pm
by Brumby Boy
Hi all i am in the process of rebuilding an ej22 out of a series 1 liberty to fit into my brumby. now i have a quote for a rebuild kit from partsrus.com.au for $600 plus freight, the kit includes Pistons, Rings, Main and Big end bearings, a full engine gasket kit and head bolts.
Does any one think this is a bad price? Can any one sugest a better kit? I believe it is an acl kit.
Thanks,
Ian
Posted: Sat Oct 14, 2006 10:50 pm
by Matt
Try Cheapa Auto Spares(on ingham road just past Hugh street), they should be able to match the price.
Posted: Sat Oct 14, 2006 11:27 pm
by Brumby Boy
kool thanks man. i got prices for a gasket kit off them and that was 350 bucks alone
Posted: Sun Oct 15, 2006 12:56 am
by Matt
Thats scary i got my VRS kit for an EA81 for $60. I have a contact or 2 down there i will do some research on monday and see what i can get it for.
Posted: Sun Oct 15, 2006 12:05 pm
by cameron
You could try Mendham Engineering in Brissy too, that's where I get my stuff from. 07 32753311 . Full rebuild for a EA81 cost me $436
Any body rebuilt a N/A EA82
Posted: Sun Oct 15, 2006 9:00 pm
by tobyduffill
Hi has someone rebuilt a EA82 N/A motor, what did it cost please?
Toby
cameron wrote:You could try Mendham Engineering in Brissy too, that's where I get my stuff from. 07 32753311 . Full rebuild for a EA81 cost me $436
Posted: Tue Oct 17, 2006 4:58 pm
by El_Freddo
tobyduffill wrote:Hi has someone rebuilt a EA82 N/A motor, what did it cost please?
Toby
Hey toby.
I'm currently rebuilding a N/A MPFI EA82 slowly. I have new rings and bearings and a new gasket kit, i also got the heads shaved. All up i've spent about 700 bucks (can't quite remember the price of the Bearings and rings).
Gasket set (i think i got ripped here according to the posts above) was 360 -> 600 for a genuine kit
Heads shaved 60 each
And i think a new set of standard bearings and rings were about 200 the lot. I'll try an remember to look it up when i get home.
Hope this helps.
Cheers
All help is appreciated.
Posted: Tue Oct 17, 2006 6:13 pm
by tobyduffill
Thanks Bennie, all help appreciated mate. My old Subie will need it eventually so I will get some gaskets and belts in readiness for the time. Bearings and rings will need to wait till I can measure everything I guess.
Thanks again for your help, Toby
El_Freddo wrote:Hey toby.
I'm currently rebuilding a N/A MPFI EA82 slowly. I have new rings and bearings and a new gasket kit, i also got the heads shaved. All up i've spent about 700 bucks (can't quite remember the price of the Bearings and rings).
Gasket set (i think i got ripped here according to the posts above) was 360 -> 600 for a genuine kit
Heads shaved 60 each
And i think a new set of standard bearings and rings were about 200 the lot. I'll try an remember to look it up when i get home.
Hope this helps.
Cheers
Posted: Wed Sep 09, 2009 10:46 pm
by phillatdarwin
Bearings and rings mite be stamp in the block .
Posted: Wed Sep 09, 2009 11:32 pm
by guyph_01
I'm after headgaskets and head bolts for a EJ22, Whats the beat cheapest place to get them.
thx
Posted: Thu Sep 10, 2009 12:05 am
by phillatdarwin
get online and look maybe in the USA it be cheaper .
just thinking .
as i can get a gasket set for a ea82t for about $80 aus at my door .with in 7days