MY front drive shaft seals & bearings

Cliff R · Post by **Cliff R** » Sun Sep 20, 2015 4:07 pm

Can anyone confirm if inner and outer bearings and seals for each side of an MY (1982 if it makes any difference) are the same or not.
I pulled the front LH drive shaft out today as the inner CV boot is split and I see the inner bearing seal is leaking.
I pulled both the inner and outer seals off and the seals look the same but as I haven't measured where the seals seat on the drive shaft and the inner diameter of the front hub I am not sure.

Silverbullet · Post by **Silverbullet** » Sun Sep 20, 2015 5:09 pm

Yes they are the same, 2 x identical bearings and 2 x identical seals

Cliff R · Post by **Cliff R** » Sun Sep 20, 2015 5:29 pm

Silverbullet

Thanks Muchly.