Page 1 of 1
who can pull their drivetrain out without liftin the car...
Posted: Sat Oct 22, 2005 8:26 pm
by bluesteel
I CAN
engine, gearbox, driveshafts, talshaft and diff all without jacking it up or going up wheel ramps
Posted: Sat Oct 22, 2005 9:56 pm
by tim_81coupe
Yeah me too
I only jack my wagon up to work on brakes / suspension.
The coupe is the opposite - I have to jack it up to remove the diff, exhaust or even the tailshaft. And the worst is if I want to remove the engine & gearbox, I actually have to undo the crossmember & suspension and lift the car back over the drivetrain!
Posted: Sat Oct 22, 2005 10:17 pm
by aspro
pair of clever bastards!.... i could if i drove over a deep enough ditch. but i guess that would be cheating.
Posted: Sun Oct 23, 2005 1:15 am
by Phizinza
I can't. When I put my engine back in a few nights ago I somehow popped one of my inner CV's out of its socket while jacking the gearbox. So I had to take the wheel off and axle out to put a engine in.
But I think to take it out I'd need to jack my 2" lifted rig up a little, just dont see every thing coming out the bottom
