Flywheel dowels

scoobymine · Post by **scoobymine** » Fri Jan 20, 2012 6:18 pm

How many positioning dowels should there be on the Brumby flywheel? Refitting my new clutch, found only 1 in the flywheel, one stick in the clutch plate....should there be 3 in total?

Thanks guys

revmax · Post by **revmax** » Fri Jan 20, 2012 7:44 pm

checked a couple of spare flywheels i have laying around and there is only two in each

RSR 555 · Post by **RSR 555** » Fri Jan 20, 2012 9:38 pm

There is 3 holes but like Revmax has mentioned, there is only even 2 in-situ

steptoe · Post by **steptoe** » Sat Jan 21, 2012 7:38 am

yep two, just two in the flywheel if you are lucky, or one in each means halfway to prep for machining

scoobymine · Post by **scoobymine** » Sat Jan 21, 2012 8:03 am

Many thanks guys, tapped the 2nd one back in, seems fine. Thanks for your help.