Where is transaxle oil filler

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
revmax
Junior Member
Posts: 706
Joined: Tue Dec 28, 2010 3:42 pm
Location: Coffs Harbour

Where is transaxle oil filler

Post by revmax » Wed Oct 12, 2011 6:39 pm

for my 00 Auto outback.
Found the drain plug but where the heck is the filler hole.
Please anyone !
"THE BRUMBY ! , Your not taking the Brumby I just dry cleaned the mud flaps."
Current
00 Outback with class, SOHC EJ25 auto 240,068ks
"B1" 90 Brumby with character 271,800K EA81 (But soon 5speed,103,000k EJ202)
"B2" wrecked and crushed
"B3" 89 Bush Bashing Brumby (BeeRumBee) Kept a Bucca
"B4" 89 Black Brumby (wam balam ) Kept at Kempsey
"B5" 92 Brumby (sold it)
"B6" 88 Beige Brumby
"W1" 83 wagon 308,000 AC and alot of rust repairs. (Wanda)
Brumby Trailer (Sulky)
LUV THAT BRUM !
RevMax Hobbies

[SIGPIC][/SIGPIC]

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed Oct 12, 2011 7:00 pm

you will have one on either side of the auto transmission on the drivers side (right) is the transaxle oil (short stick honey coloured oil) on the passenger side (left) is the transmission oil (long stick red coloured oil).

Image

Don't mix the two as catastrophic failure can be the result.

sorry forgot to add the oil goes in via the dipstick tube

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
revmax
Junior Member
Posts: 706
Joined: Tue Dec 28, 2010 3:42 pm
Location: Coffs Harbour

Post by revmax » Wed Oct 12, 2011 7:16 pm

Thanks Toonga. I couldn't see it cause a massive wiring loom was in the road.
Phew now I will be able to do an oil change.
"THE BRUMBY ! , Your not taking the Brumby I just dry cleaned the mud flaps."
Current
00 Outback with class, SOHC EJ25 auto 240,068ks
"B1" 90 Brumby with character 271,800K EA81 (But soon 5speed,103,000k EJ202)
"B2" wrecked and crushed
"B3" 89 Bush Bashing Brumby (BeeRumBee) Kept a Bucca
"B4" 89 Black Brumby (wam balam ) Kept at Kempsey
"B5" 92 Brumby (sold it)
"B6" 88 Beige Brumby
"W1" 83 wagon 308,000 AC and alot of rust repairs. (Wanda)
Brumby Trailer (Sulky)
LUV THAT BRUM !
RevMax Hobbies

[SIGPIC][/SIGPIC]

User avatar
mattl200
Junior Member
Posts: 324
Joined: Sat Oct 08, 2005 10:00 am
Location: NW Tasmania

Post by mattl200 » Wed Oct 12, 2011 7:48 pm

if your changing the tranie fluid dont forget the filter under the left hand guard liner bout $15 from burson or the like
- 92 brumby, ej22, MT5AWD, lseries low range, centre diff lock, glf5 dash, 5 stud conversion
lifted 3" front 2" rear all rolling round on 27" khumo Kl71's
more in progress ie:adaptronic ecu and sc14 supercharger

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Wed Oct 12, 2011 9:12 pm

Only slightly off topic, wheres the dipstick for a '98 forester gearbox...if it has one. I'v looked & looked but buggered if i can see it!
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed Oct 12, 2011 11:14 pm

same spot as the auto box on the right side of the engine

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Wed Oct 12, 2011 11:17 pm

nachaluva wrote:Only slightly off topic, wheres the dipstick for a '98 forester gearbox...if it has one. I'v looked & looked but buggered if i can see it!
I had the same issue. Remove the part of your air filter box the same way as you remove your air filter, then look straight down and you will be able to see it. I couldn't find mine at first because the yellow dipstick was covered in grease :rolleyes:
Taza

User avatar
revmax
Junior Member
Posts: 706
Joined: Tue Dec 28, 2010 3:42 pm
Location: Coffs Harbour

Post by revmax » Thu Oct 13, 2011 4:50 am

mattl200 wrote:if your changing the tranie fluid dont forget the filter under the left hand guard liner bout $15 from burson or the like
Thanks Matt. Yer done that not long after I bought it.
"THE BRUMBY ! , Your not taking the Brumby I just dry cleaned the mud flaps."
Current
00 Outback with class, SOHC EJ25 auto 240,068ks
"B1" 90 Brumby with character 271,800K EA81 (But soon 5speed,103,000k EJ202)
"B2" wrecked and crushed
"B3" 89 Bush Bashing Brumby (BeeRumBee) Kept a Bucca
"B4" 89 Black Brumby (wam balam ) Kept at Kempsey
"B5" 92 Brumby (sold it)
"B6" 88 Beige Brumby
"W1" 83 wagon 308,000 AC and alot of rust repairs. (Wanda)
Brumby Trailer (Sulky)
LUV THAT BRUM !
RevMax Hobbies

[SIGPIC][/SIGPIC]

Post Reply

Return to “Engine, Gearbox and Diff”