L series shifter bushings

Gannon · Post by **Gannon** » Mon Aug 15, 2011 8:21 pm

I did a search, but only came up with MY stuff.

Before I finish shortening the shifter linkages to go in the RX (with Liberty dual range box) and decided to tighten up the bushes while Im at it.

For those that have done it, where did you get the bushes? I was thinking of dropping into the local auto parts store and have a rattle through his box of rubber bushes to find some matches.

If I succeed, I'll post up my results.

RSR 555 · Post by **RSR 555** » Tue Aug 16, 2011 12:02 am

They are still available from Subaru. I'm 99% sure they use the same as the Impreza but Andy (frog) should be able to help out here?

YouTube · Post by **El_Freddo** » Tue Aug 16, 2011 12:24 am

RSR 555 wrote:Andy (frog) should be able to help out here?

He would certainly be my first port of call for something like this!

Cheers

Bennie

steptoe · Post by **steptoe** » Tue Aug 16, 2011 8:12 am

Genuine coz they are pairs of bushes inside bushes

633011330 bush g/s lvr is one part number of three ?
search and should find a pic in here

Uploaded with ImageShack.us

Gannon · Post by **Gannon** » Thu Aug 18, 2011 7:00 pm

Andy has got me part numbers for the bushes.

Ignore the shortening of my linkages

Join 1 has 2 x 633124170 and 2 x 633124180

Join 2 has the same as above

Join 3 has 2 x 633011330

Join 4 has 2 x 33146ga210

Here they are dismantled

steptoe · Post by **steptoe** » Fri Aug 19, 2011 8:10 am

Those steel spacer tubes !, I either need a pair or their specs, Gannon can you supply me their specs please?

tripping up on those deck nails yet

?

Gannon · Post by **Gannon** » Fri Aug 26, 2011 9:53 pm

Good thing this was bumped up, I got the bushes in the mail today. BIG thanks to Frog for getting me the parts.

I'll install the bushes tomorrow and take more pictures. I'll also get the calipers out and measure those tubes for you Jon

The deck nails are on my to-do list, I ripped a sock on one the other day

steptoe · Post by **steptoe** » Sat Aug 27, 2011 3:47 am

BUMP - those measures will be appreciated , anyone got spares kicking around?

Gannon · Post by **Gannon** » Sun Aug 28, 2011 11:13 am

Ok, the tube is 36mm long, 11mm outside diameter and 8mm inside diameter

I have another linkage kicking around somewhere, if I have spare tubes, would you like them?

Gannon · Post by **Gannon** » Sun Aug 28, 2011 7:12 pm

Shortened, welded and painted, plus the new bushes.

All ready to bolt in next weekend.