The AUSubaru.com.au Forums

The engine is a 99 gt forester i have taken off the turbo. The pipe in pic1 doesn't connect to anything atm.
In pic2 this is where it goes in the block

In pic3 there is a male piece under the throttle body intake in pic2 you can just see it directly under the intake red arrow dose the pipe connect to it? I cant see that close to see what it is (even with glasses on) there is nothing in the manual about it
The pipe looks like it hasn't been on for quite a while it is very hard
I will replace it
Sorry about the pics (phone camera)

Jan

Jan these photos of yours show the crank case breather and pcv valve (positive crankcase ventilation)

yarney wrote:

crankcase breather

yarney wrote:

pcv valve

yarney wrote:

this diagram shows how the pipes need to be connected for the crankcase recirculation to work it is from the 92 liberty FSM


here is how it looks in my liberty







hope this helps

TOONGA

Thanks TOONGA

Yes that's what i need to know
Thanks for the pics

Jan

Jan not a problem I know it is hard to see in the photos but where the crankcase breather comes out of the block, there is a "T" in the pipe and a smaller pipe heads into the aircleaner from there. As you can see in the photos the breather then goes into the PCV valve.

TOONGA