R160 Locker project

Get the most out of your Engine / Gearbox with these handy hints ...
User avatar
Smokey
Junior Member
Posts: 438
Joined: Thu Dec 15, 2005 10:00 am
Location: Sydney, NSW

Post by Smokey » Fri Sep 14, 2012 4:01 pm

Has anything further become of this project?

User avatar
Mitchhsj
Junior Member
Posts: 187
Joined: Mon Oct 03, 2011 7:43 pm
Location: Bli bli, sunshine coast

Post by Mitchhsj » Sat Sep 15, 2012 6:42 pm

hows the locker coming guys? i got a few spare l series rear diffs, u have me thinking now so I'm gone pull one apart tomorrow and have a look and see if i can help with getting a man locker going..
ahhhrrr the subi will make it!

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sun Sep 16, 2012 12:44 pm

Perhaps Taza needs to look at the centre diff locking mechanisim that the vortex boxes came with?

Image

yes yes yes I know it isn't a rear diff :) it may give him another path to follow


the whole section of the FSM can be found here downloads.php?do=file&id=123

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Sun Sep 16, 2012 2:31 pm

Thanks TOONGA, that's really helpful. I should try and make a centre diff lock. I'm not currently sure how the centre diff works in our AWD Subies.

With the rear locker I have completed my design and am pretty much ready to get one made. It's just $$$ and time now to do so, then the testing can being :D

User avatar
El_Freddo
Master Member
Posts: 12486
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sun Sep 16, 2012 6:29 pm

taza wrote:then the testing can being :D
Bugger "testing" - I'll take three, one for me, one for venom and one for Dulagarl. We'll let you know how they go :twisted:

Seriously though, I can't shell out for three at the moment :(

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Yarran
Junior Member
Posts: 67
Joined: Wed Jul 10, 2013 2:01 pm
Location: Western Australia

any progress?

Post by Yarran » Sun Sep 08, 2013 10:34 pm

taza wrote:Thanks TOONGA, that's really helpful. I should try and make a centre diff lock. I'm not currently sure how the centre diff works in our AWD Subies.

With the rear locker I have completed my design and am pretty much ready to get one made. It's just $$$ and time now to do so, then the testing can being :D
so are you mass producing these puppies yet? ha

if so ill take one:cool:

User avatar
vincentvega
Senior Member
Posts: 2446
Joined: Tue Oct 04, 2005 10:00 am
Location: Brisvegas
Contact:

Post by vincentvega » Mon Sep 09, 2013 8:04 am

yeah right..
Image
brumbyrunner wrote:And just to clarify the real 4WD thing, Subarus are an unreal 4WD.

User avatar
brumbyrunner
General Member
Posts: 1743
Joined: Mon Apr 10, 2006 10:00 am
Location: SEQ

Post by brumbyrunner » Tue Sep 10, 2013 7:16 am

vincentvega wrote:yeah right..
Ditto
Settlement Creek Racing

User avatar
thunder039
Junior Member
Posts: 998
Joined: Mon Jun 20, 2011 6:41 pm
Location: victoria AUS

Post by thunder039 » Wed Sep 11, 2013 9:52 pm

i believe the project was abandoned
2004 subaru forester -gone
1999 subaru forester- no more :(
1989 subaru brumby- sold!
2008 zook jimny -sold!
2003 mitsubishi pajero - missus car
2013 nissan d22- set up for long distant touring

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

BRZ diff ...

Post by Bantum » Thu Sep 12, 2013 1:25 am

Sorry to here nothing came of it ... :(

On another track, I wonder if the new BRZ rear diff could be utilised somehow ?

Image

Cheers, Bantum ...

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Thu Sep 12, 2013 11:51 pm

I did actually finish designing it and had started making pieces on the lathe at work.
Really though I don't see the point in a Subaru. Good front and rear limited slip diffs do an excellent job in a Subie. Anymore and the rest of the car just isn't going to hold up to the task....

User avatar
vincentvega
Senior Member
Posts: 2446
Joined: Tue Oct 04, 2005 10:00 am
Location: Brisvegas
Contact:

Post by vincentvega » Fri Sep 13, 2013 12:47 pm

If you had ever been in a suby with a locking center and locking rear diff you wouldnt think that way. unstoppable..
Image
brumbyrunner wrote:And just to clarify the real 4WD thing, Subarus are an unreal 4WD.

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Fri Sep 13, 2013 4:37 pm

IMO a rear locker would mean needing less momentum so easier on the car. Also,the harshest thing for a CV is lots of wheelspin in the air then come down hard on solid ground. Great way to snap a shaft or CV! A locker would prevent the wheelspin of the lifted wheel ;)

Taza, do you think your design would work? There's lots of people, myself included, who would give their left testicle for a rear locker! :cry:
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
El_Freddo
Master Member
Posts: 12486
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Fri Sep 13, 2013 7:23 pm

taza wrote:Really though I don't see the point in a Subaru. Good front and rear limited slip diffs do an excellent job in a Subie. Anymore and the rest of the car just isn't going to hold up to the task....
Clearly you don't have the real terrain where a locked rear end comes into it's own! Trust me, a subi and lock rear = win
vincentvega wrote:If you had ever been in a suby with a locking center and locking rear diff you wouldnt think that way. unstoppable..
Totally agree!!
NachaLuva wrote:IMO a rear locker would mean needing less momentum so easier on the car. Also,the harshest thing for a CV is lots of wheelspin in the air then come down hard on solid ground. Great way to snap a shaft or CV! A locker would prevent the wheelspin of the lifted wheel ;)
Yep - every 'yota or "real" 4x4 owner with IFS will tell you the same thing, except in these IFS units they shatter the crown or pinion wheel - because they're actually running in reverse all the time!
NachaLuva wrote:Taza, do you think your design would work? There's lots of people, myself included, who would give their left testicle for a rear locker! :cry:
For me - ONLY if it's a manual locker. I want to decide when I need the rear to be locked ;)

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Diff Llocker Project ...

Post by Bantum » Tue Apr 25, 2017 4:53 am

Update : A group of us over on FB have started a crowd sourcing project for the R160 Diff Locker ...

Welcome to check it out : https://www.facebook.com/BantumWorks/

Will post updates on here as well ... :)

Cheers, Bantum ...

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Tue Apr 25, 2017 9:56 am

If you didn't already know - there was already an FB post ages ago on one of the Subaru group pages, asking to put expressions of interest to this website: http://www.caplocker.com/

Which I did, didn't think much would come of it. Since then though I received an email from them (around January) I think it said they had enough expressions of interest to make it viable and were looking at sample diffs to get the design. Also asking who would be comfortable paying a deposit so they could get the manufacturing going. I haven't seen or heard anything beyond that since then, and in typical FB group fashion I can't find any record of any of this :evil: This is why forums are so much better. You'll just have to trust me :rolleyes: Also the deposit was something like $1k and finished cost close to $3k :shock: But then this is no easy thing they're trying to do, with the kind of work that goes into a project like this I think that is reasonable.
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
El_Freddo
Master Member
Posts: 12486
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Apr 26, 2017 8:39 pm

I'd like to track down an R180 locker and fit that. A little bit heavier but nothing like another idea I had!

I doubt I'd be buying something new like that cap locker. Cool that it's happening or has the potential. If I ever get a newer Subaru I might consider it.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Lost in Transit

Post by Bantum » Sat Apr 29, 2017 4:10 am

As far as I know the project you mentioned Sam fell on its arse, the company has no longer any interest in it as the guy who was working on it left / split with them ... ( not sure on all the details )

Just did some sketching for the new diff, will post it here later ... :)

See here : downloads.php?do=file&id=159&act=down

Ciao, Bantum ...

User avatar
El_Freddo
Master Member
Posts: 12486
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Apr 29, 2017 1:52 pm

I gotta say, I take my hat off to you and your ability to draw such accurate drawings like that.

So what's the game plan from here?

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

R160 Diff Locker Project ...

Post by Bantum » Sat Apr 29, 2017 7:12 pm

Matt ( from Subi Oz Lift ) has taken up the reins & is looking to take it to the Harrop mob. Alex ( the engineer ) is assisting in the design aspects & my good self doing some of the sketching / CAD work - more info to be found on the FB Site :

Image

https://www.facebook.com/R160.Diff.Locker.Project/

Welcome to do the survey too ... !

Cheers, Bantum ...

Post Reply

Return to “Engine, Gearbox and Diff”