The AUSubaru.com.au Forums

I need an EA82T Intake 'boot', the one that goes from the AFM to the turbo, mine is rock hard.

I need the Hotwire type one, which is longer than the flap one,

I do, however, have a new flap one I can swap someone if they have a good long one, but want a short one... (I say new, i inherited it with a car, it is spotlessly clean, and nice & soft)

thanks.

You might have to go silicone and pipe like the one i made for mine



I used a 2.75" to 2.5" black silicone reducer, a mandrel bent 2.5" piece of exhaust pipe, cut and welded, with barbs for PCV and AAV. I used a 70deg blue silicone elbow to join it to the turbo

Neville, do you have a part number on the one that you wanna replace? Or a pic? I have one that is different but may be more the spider hotwire to turbo 'hose' that i need to keep with my spider, but if it is a not needed I may be able to help

Jonno