How to get that rev Limiter off?

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
Kralle
Junior Member
Posts: 70
Joined: Thu Oct 15, 2009 4:54 am
Location: Germany

How to get that rev Limiter off?

Post by Kralle » Tue Mar 02, 2010 1:37 am

Hello,
i convertet my subi with a Garett GT35 turbocharger, the powerband is about 5 - 7,500 R/min and my subi regulate the rev at 7.000 r/min, how can i get that fu***** rev limiter off?
Its a EA82T engine

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Tue Mar 02, 2010 5:20 am

You will have to ditch the factory ECU and get an aftermarket engine management system.

But there isnt much point as the engine's heads and cams arernt designed to make useable torque at those revs
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
Kralle
Junior Member
Posts: 70
Joined: Thu Oct 15, 2009 4:54 am
Location: Germany

Post by Kralle » Tue Mar 02, 2010 6:58 am

where can i get that aftermarket engine management system?
or can i edit the original ecu?

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Mar 02, 2010 9:02 am

7000 rpm in a turbo EA82? YIKE. What for? You are beyond max torque at 4 grand and max horsepower beyond 5 or 6 on old turbo. Is it calculations that tell you your powerband upper mark is 7500, as you say it cuts out at 7000. Did not know we had a rev limiter on old L turbos. Your oil pump may not cope at your expected revs either or the oil may start to froth up - and that is not good either. Mine sometimes touches 6500 for a very short moment and almost beyond torque peak when shift to next gear

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Tue Mar 02, 2010 6:12 pm

I dont think you need to go beyond 7000rpm?
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Mar 02, 2010 9:12 pm

It is winter over there in Deutchland, and almost as dark as long as those bored in winter Icelanders , and we've seen the crazee things they get up to when daylight and warm weather strikes !!

User avatar
Kralle
Junior Member
Posts: 70
Joined: Thu Oct 15, 2009 4:54 am
Location: Germany

Post by Kralle » Wed Mar 03, 2010 4:33 am

yes its winter -.- i hate it and have to do some crazy things on my subie, i dont know why but i have to :mrgreen:
okay i think i could live with a powerband from 5-7.000rmp
but i need antilag :D Just a Joke :mrgreen::mrgreen:

ok, now lets make it ready for the "tüv", is there something comparable in australia?

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Wed Mar 03, 2010 9:25 am

is TUV your transport regulatory authority who appoints inpectors to look over your car before issuing you the licence plates or number plates as we call them in Australia, to ensure it is safe for yourself and other road users - for a fat fee of course.
In Australia we have a number of states and territories who look after the cars in their state. They set their own fees for inspection, plates, and registration. Some states include third party injury insurance in the fee, others need proof that you have got it before issuing registration. The rules for inspectors are all different as well - no national standard for all states !! Visually inpection result of low brake pads friction material is a fail in one state, pass in another, 10 kms away, so long as the brake test machine gives the OK IT STOPS QUICK response :)

Post Reply

Return to “Engine, Gearbox and Diff”