The AUSubaru.com.au Forums

Will a Liberty Gen 2 Auto bolt onto Gen 1? This is will a Auto out of a Gen 2 1994 Liberty bolt up to a Gen 1 1993 Liberty?
The auto in question is a 4 bolt model.

Thanks
Matt

Should do. The Gen1 and Gen2 are basically the same platform. Just double check the wiring pinouts. Im guessing both engines are EJ22's

Unsure on the liberty it is going into.
Also the auto is manual control, not computer???

Its a 4 bolt so it'll work.
Both engines are EJ22.
The connections are different but if you have existing tranmission, just swap the wiring/plugs over.
I don't know about the final drive, but I'm pretty sure its 4.11.
Cheers
AP

Edit: For sure Gen 1 has 4.11, but I'm pretty sure Gen 2 also has 4.11 as well.

Matt wrote: Also the auto is manual control, not computer???

All EJ auto's (4eat as they are known) are computer controlled. They will simply not work right without the TCU

I thought they where computer controlled or controlled be the TCU.

Matt wrote:Will a Liberty Gen 2 Auto bolt onto Gen 1? This is will a Auto out of a Gen 2 1994 Liberty bolt up to a Gen 1 1993 Liberty?
The auto in question is a 4 bolt model.

Thanks
Matt

bolt the box up, plug it in and drive. no modifications required.

AlpineRaven wrote: The connections are different but if you have existing tranmission, just swap the wiring/plugs over.

Wrong. They are the same.

Thanks fella's that is the answer i thought you would say, is that it will bolt up and will be driveable.