Page 1 of 1
Strange Noises
Posted: Tue Sep 23, 2008 7:19 pm
by SUBANOOB
MY 92 BRUMBY 4 SPD. EVERY TIME I CHANGE GEARS 1,2,3. THERE IS A HIGH PITCH WINDING NOISE. IT FIRST BEGAN WHEN I DROVE IT HARD....SILLY, I KNOW. IT IS A VERY WEIRD NOISE, ALMOST LIKE......THIS SOUNDS STUPID, LIKE A SUPER CHARGER UNDER THE HOOD.
THANKS IN ADVANCE FOR ANY HELP.
Posted: Tue Sep 23, 2008 8:03 pm
by Matatak
thrust bearing?
Posted: Tue Sep 23, 2008 9:13 pm
by AlpineRaven
SUBANOOB wrote:MY 92 BRUMBY 4 SPD. EVERY TIME I CHANGE GEARS 1,2,3. THERE IS A HIGH PITCH WINDING NOISE. IT FIRST BEGAN WHEN I DROVE IT HARD....SILLY, I KNOW. IT IS A VERY WEIRD NOISE, ALMOST LIKE......THIS SOUNDS STUPID, LIKE A SUPER CHARGER UNDER THE HOOD.
THANKS IN ADVANCE FOR ANY HELP.
does it happen when you push the clutch in?
Cheers
AP
Posted: Wed Sep 24, 2008 11:26 am
by Suba
Thrust bearing , pull the box out and replace the thrust bearing , cheap and relitivly easy job.
Mike.
Posted: Wed Sep 24, 2008 11:32 am
by AlpineRaven
Suba wrote:Thrust bearing , pull the box out and replace the thrust bearing , cheap and relitivly easy job.
Mike.
Yeah thats right. It might be worthwhile replace the clutch while the box is removed, saves headache later. Otherwise you can just replace the bearing itself. If it was me i'll buy clutch kit and replace whole kit.
Cheers
AP
Posted: Wed Sep 24, 2008 2:29 pm
by yarney
SUBANOOB wrote:MY 92 BRUMBY 4 SPD. EVERY TIME I CHANGE GEARS 1,2,3. THERE IS A HIGH PITCH WINDING NOISE. IT FIRST BEGAN WHEN I DROVE IT HARD....SILLY, I KNOW. IT IS A VERY WEIRD NOISE, ALMOST LIKE......THIS SOUNDS STUPID, LIKE A SUPER CHARGER UNDER THE HOOD.
THANKS IN ADVANCE FOR ANY HELP.
That's all the doughies you were doing in the mud:twisted:
You should have let us know at the meeting there was plenty of people who would have known
Posted: Wed Sep 24, 2008 7:43 pm
by SUBANOOB
:-DYarney I Have Been Hesitant To Push Any Limits At The Club. I Know That It Is One Of The Benifits Of Being In The Club.
Alpine Raven. Yes It Makes A Noise When You Push In The Cluch.
:???:Question.... Is The Price Of A 5 Spd Conversion In The Same League As A New Clutch Kit And The Rest?.....should I Just Get A 5 Spd Now?
Posted: Wed Sep 24, 2008 8:06 pm
by 00outback
Get a L series 5 speed, I picked one up for $100 place a wanted ad on the foum some one will have one.
Posted: Wed Sep 24, 2008 8:39 pm
by Suby Wan Kenobi
You will also need an An L clutch cable as the release is on the other side of centre line. L clutch plate is different to the MY clutch plate, you will also need an L series tailshaft. You will also need to match the box ratio with the diff raito. If you get stuck give us a ring.
Alpine Raven. Yes It Makes A Noise When You Push In The Cluch.