The AUSubaru.com.au Forums

Posted: **Wed Aug 20, 2008 4:53 pm**

Looking for a little help here...

I have a 6/91 Gen 1 EJ22 I am rebuilding.
After disassembly & inspection the 'little end' (Gudgeon pin to con rod) bearings on 2 of the con rods are completely stuffed.

There are no aftermarket ones available that I can find.
Genuine Subaru one comes with a new con rod.

But the Gen 2 (6/94+) EJ22 lists the 'Little end' bearings as a part.

My question is the con rods the same between the Gen1 & Gen2 EJ22? Do they share the 'Little end' bearings??

Thanks in advance - Justin

Posted: **Thu Aug 21, 2008 4:10 pm**

No one knows???

Posted: **Mon Sep 01, 2008 7:32 am**

First I must say a HUGE thanks to Andy (FROG) for his help on finding a part number for the conrod bushes from the later model EJ22.

The answer is Yes they fit.

Apparently ALL liberty (EJ22,EJ20,EJ25) use the same conrod bush/bearing

Posted: **Mon Sep 01, 2008 9:00 am**

Good to know
didi you just buy one and try it or......?

Posted: **Mon Sep 01, 2008 11:37 am**

I bought the set of 4 & hoped they fitted in...

The AUSubaru.com.au Forums

Gen 1 EJ22 'Little End' bearings...

Gen 1 EJ22 'Little End' bearings...