Page 1 of 1
Clutch Problems
Posted: Sun Aug 17, 2008 5:18 pm
by ChPLAT
Been noticing lately that when I have the clutch in, even before it gets anywhere near full travel, it has a bit of a squeal. Nothing too bad but still something to worry about?
Posted: Sun Aug 17, 2008 6:02 pm
by chubby37
throw out bearing...not exspensive but need to pull box or motor out to fix it....lees performance at springwood can get them if you cant find one
Posted: Sun Aug 17, 2008 7:14 pm
by AlpineRaven
Gotta get that done soon before it screws up big time then you wont be able to change gears!.. (happened to me in Bendigo and had to drive to Geelong with stuffed up clutch and had to crash gears..
Cheers
AP
Posted: Sun Aug 17, 2008 7:15 pm
by ChPLAT
Ok then I'll look into it ASAP. Cheers guys.
Posted: Sun Aug 17, 2008 7:19 pm
by chubby37
easy way to do it is lift the motor up but not all the way out and you can just slip one bearing out and the new one in....
Posted: Sun Aug 17, 2008 9:09 pm
by AlpineRaven
Actually... how old is the clutch? Does it have much wear left? Wouldn't it be easier if change the clutch assembly instead of doing the bearing alone? Just a thought.
Cheers
AP
Posted: Sun Aug 17, 2008 9:13 pm
by ChPLAT
I'd say its the stock clutch as its only done 130.000.
Posted: Sun Aug 17, 2008 9:42 pm
by chubby37
if you replace the clutch there are 2 sizes...pull it out and measure it so you get the right one....it cought me out once doing a a mates my