oil pump seals/gasket

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
esray71
Junior Member
Posts: 123
Joined: Fri Nov 23, 2007 6:32 pm
Location: Doveton

oil pump seals/gasket

Post by esray71 » Wed Jul 16, 2008 6:08 pm

Does anyone know where to buy gasket and seals for oil pump (if it comes in a complete kit?) I tried bursons but they don't have, should i buy from subaru? how much would i be paying?

User avatar
rob83ke70
Junior Member
Posts: 193
Joined: Sat Jun 21, 2008 4:12 pm
Location: Orange NSW

Post by rob83ke70 » Wed Jul 16, 2008 6:09 pm

subaru would be worth a go. I'm assuming you are talking about ea81 or ea82 engine?

User avatar
esray71
Junior Member
Posts: 123
Joined: Fri Nov 23, 2007 6:32 pm
Location: Doveton

Post by esray71 » Wed Jul 16, 2008 6:37 pm

yep the EA82

User avatar
mattl200
Junior Member
Posts: 324
Joined: Sat Oct 08, 2005 10:00 am
Location: NW Tasmania

Post by mattl200 » Wed Jul 16, 2008 6:40 pm

the last kit i got from subaru was made up from there parts shelf and cost me about $15 or something like that for an ea81
- 92 brumby, ej22, MT5AWD, lseries low range, centre diff lock, glf5 dash, 5 stud conversion
lifted 3" front 2" rear all rolling round on 27" khumo Kl71's
more in progress ie:adaptronic ecu and sc14 supercharger

User avatar
El_Freddo
Master Member
Posts: 12638
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Jul 16, 2008 10:12 pm

I'm surprised that burson's couldn't order a kit in. I've had problems with pinching the seals as they go in and don't find out till after six months after I put it on when the oil pump starts leaking from the seals again...

I've got a mate at subaru that I get my gaskets from so havn't tried aftermarket kits. They should have all the gaskets and rings in there that you need to do the job though.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
esray71
Junior Member
Posts: 123
Joined: Fri Nov 23, 2007 6:32 pm
Location: Doveton

Post by esray71 » Wed Jul 16, 2008 10:39 pm

great thanks for the info!

Post Reply

Return to “Engine, Gearbox and Diff”