The AUSubaru.com.au Forums

Hey guys,
So I've stripped the thread on one wheel lug on one hub.
It happened when tightening so it's on there and the wheel's secure but I don't wanna take it off without first having a fix solution.
This is on my L series sedan by the way, front left wheel.
Some of the others are kinda starting to cross thread a bit too so is it worth replacing the whole hub or can you replace those lugs individually?
Thanks,
Tommo.

Studs and yes they're removable .

dont worry too much abuot it tommo

just hit it out with a big hammer and put a new one in

can either buy new ones from a parts shop, or bang a few good ones out at a wreckers

As already said its an easy fix, you can use ones from a wreckers or buy new ones from an auto part store

they are all of $10 from subaru with nuts. done this a few times now.

Thanks alot guys,
I was hoping it'd be something simple. (and cheap)