Page 1 of 1
Liberty rear hub nut size ?
Posted: Fri Apr 27, 2007 7:42 am
by discopotato03
Can someone confirm that this is 32mm please .
Cheers Adrian .
Posted: Fri Apr 27, 2007 11:33 am
by Brumby Boy
Yea 32mm it is
Posted: Sat Apr 28, 2007 8:50 pm
by Suby Wan Kenobi
Liberty 32mm, L series 36mm
Posted: Sat Apr 28, 2007 11:13 pm
by Fatz
correctamondo
Posted: Mon Apr 30, 2007 1:01 pm
by discopotato03
Thanks guys , Gee mentioned that a 1 1/4" fits the Liberty's rear nut better than a 32mm socket and I can confirm that this is the case . 1.25 x 25.4mm = 31.75mm . I'll go get a 36mm socket to cover my RX-T's rear hub nuts .
By the way do the L series factory rear discs slide over the outside of the rear hubs or bolt from behind ? I'm hoping RX-T rear hubs are same as Vortex XT6 but drilled to 4 x 140 rather than 5 x 100 .
Cheers Adrian .
Posted: Mon Apr 30, 2007 9:01 pm
by AlpineRaven
Rear and Front nuts are same sizes.
Cheers
AP