The AUSubaru.com.au Forums

Got the EA82-T and gave it a good degrease today and hose off, left it to dry. Not it takes heaps to start, even with foot flat to the floor, then i can get it to idle at 1200rpm where it should be at 800, anything under 1200rpm it dies.

Only other things i cleaned was the outside of two of the spark leads, and the sensor wiring plug into the pod filter hose.

any suggestions on what i have stuffed?

Check to make sure you havnt knocked off any vacume lines and that everything dry

was pipe for pod filter had come loose.

yea always something simple