Page 1 of 1
differences in water pumps
Posted: Mon Nov 20, 2006 9:28 pm
by wrx_nut
is there any differences in a NA ea82 and a ea82t?
cheers
i no theres about a $30 difference in them
Posted: Tue Nov 21, 2006 7:24 am
by fredsub
apparently Not with subaru part nos,
aftermarket, apparently there is a distinction....don't know what? go the subaru one, its cheaper anyways.
search the forum, i wrote the partno somewhere...
Posted: Tue Nov 21, 2006 9:19 am
by steptoe
105mm or 110mm deck heights so said in here somewhere. I stuffed around with suppliers for weeks and they got me the EA82T listed pump and still appears to be wrong !! The deck height appears to be just the difference in how far along shaft the fan flange sits > I resolved I will be able to press flange in correct direction to make fit. I think differing flange locations depend on NA, T or T with ribbed fan belts !
Part number for Enduro brand supplied out of Melbourne for EA82T W3034E $98 retail
Posted: Wed Nov 22, 2006 11:00 am
by wrx_nut
just put a carby ea82 water pump on my ea82t and it fits perfectly...shafts are the same.. put them both next to eachother and couldnt notice any differences at all..
$60 around that price compared to $120 for an ea82t one....
do they have different flow rates?
wrx_nut
Posted: Wed Nov 22, 2006 6:56 pm
by Chris_Rogers
yes there is a difference in height. I had this probelm with my old sedan when I bought a pump for it. about 5mm difference - NA is shorter.
Posted: Thu Nov 23, 2006 3:48 pm
by wrx_nut
well mine is on the car and seems to line up ok and runs good..?
Posted: Thu Nov 23, 2006 4:56 pm
by vincentvega
you need to use a puller to adjust the pulley on the shaft to line up with the other pulleys. Had the same problem recently in a mates EA82T. We thought it must be the wrong pump, turns out theyre all like that..
Posted: Fri Nov 24, 2006 11:21 am
by steptoe
and the suppliers charge extra coz the flange is in a different line up !!
Posted: Fri Nov 24, 2006 2:54 pm
by wrx_nut
well i bought the na ea82 water pump and fitted it to my ea82t motor and it all seems fine.. does that sound strange>?
seems to be working fine...
Posted: Fri Nov 24, 2006 6:52 pm
by vincentvega
if it lines up then you got lucky. if it doesnt you adjust it.
as long as in the end it all lines up your all good
Posted: Fri Nov 24, 2006 9:07 pm
by wrx_nut
now worries thanks for that guys...looks like im lucky
