ea82t turbo bad noise

wrx_nut · Post by **wrx_nut** » Thu Nov 02, 2006 8:31 pm

hey guys, driving my ea82t wagon today and noticed the turbo is making a really strange type of whistle when it starts boosting (when the turbo spins faster) through all the rev range.....

its like more of a wine than the normal whistle

i have a pod filter and 2.5" exhaust on with standard everything else...
had a quick look at all the vaccume lines and they seem to be alright but i did notice the center of the turbo (bearing part) was a little oily underneath....

im leaning towards no oil getting to turbo so its got a dry bearing

any help would be great

cheers

wrx_nut

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Thu Nov 02, 2006 9:29 pm

Have only hear 2 turbos make that sound and both times it wasnt long before the dreaded white cloud appeared out the pipe. Both turbos removed and found to have excessive spindle float and full of engine oil and water

wrx_nut · Post by **wrx_nut** » Fri Nov 03, 2006 10:20 pm

can you get the ea82t turbo's rebuilt? any ruff prices?

also i might take it off this w/e... does it just unbolt? what about the oil water lines?

wrx_nut · Post by **wrx_nut** » Sat Nov 04, 2006 6:39 pm

took the turbo off today....
is has about 1cm of horizontal play in the shaft and around 1mm verticle play

anyone got a ea82 IHI turbo rebuilt before?

cheers

Xtreme_RX · Post by **Xtreme_RX** » Sat Nov 04, 2006 8:13 pm

It’s cheaper to get another one.... or Fit a VF10...

I *might* have one for sale soon...

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Sat Nov 04, 2006 9:11 pm

I used ot have a spare one but lent it to a "mate" and have not seen him or the turbo since.

Craigus · Post by **Craigus** » Sun Nov 05, 2006 7:03 am

lent it to a "mate" and have not seen him or the turbo since.

Well, you know the saying - if you lend $100 to someone and never see them again, it was probably worth it ...

wrx_nut · Post by **wrx_nut** » Sun Nov 05, 2006 3:05 pm

haha yer surely it shouldnt be too much to rebuid... compressor and turbine wheels havent hit the castings so would just be a new bearings, seals, balance, etc...

fingers crossed.. taking it to a specialist this week...

while its out im changing the water pump also

wrx_nut