Page 1 of 1
vent control vaccume ea82t
Posted: Wed Oct 18, 2006 7:01 pm
by wrx_nut
where abouts do you put the little vaccume hose that goes to the vent control tank (behind RHS strut tower) on an ea82t?
since i converted my wagon i cant seem to get it working..
does it have to be connected to direct vaccume with a 1 way valve because i now have boost?
cheers
wrx_nut
Posted: Wed Oct 18, 2006 7:07 pm
by D3V1L
mine is connected straight into the port at the base of the plenum chaimber...where my boost guage is also plugged into,,,and it all seems to work fine for me dave
Posted: Thu Oct 19, 2006 8:58 pm
by Suby Wan Kenobi
You dont need a check walve but the valve on the tank sometimes fail so you may need one. My guess is however that it has become separated at the join above the accelerator pedal. There is also a one way vavle there too
Posted: Thu Oct 19, 2006 9:07 pm
by wrx_nut
yer checked all that it wasnt getting vaccume so im getting some vaccume line this w/e and trying to sort it out..might change the tank over aswell see what happens... the one way check valves should only suck air (vaccume) from the tank right?