Revs and revs till stalls, what could it be?

Having issues with your ride ? Ask away in here ...
Post Reply
User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Re: Revs and revs till stalls, what could it be?

Post by TOONGA » Wed May 15, 2019 8:51 am

Benp124 wrote:
Wed May 15, 2019 5:46 am
Got a spare carb that has that part, was wondering if anyone know how to remove the top half of the carb to make it easy to slot the throttle air pump in as it can’t be pulled out, or would I be better off switching the carbs??
I would replace the whole carby, but this depends on 2 things. 1 is the base plate the right size? and 2 is the carby the same or similar model to the one on the engine? if both the answers are yes replace the carby and fill it with upper engine cleaner then wait 10 minutes before you prime it with petrol. it will take a little longer to start but it will clean the carby out.

TOONGA

Post Reply

Return to “Trouble Shooting”