Page 1 of 1
help needed
Posted: Mon Jul 01, 2013 5:26 pm
by Brumby boi
wondering if anyone can help me
my brumby dash cluster lights/guages wont work, theres no power to them
but she starts fine and heater and interior lights etc work fine
im thinking it some sort of fuse problem
any help much appreciated
thanks
Posted: Mon Jul 01, 2013 7:06 pm
by TOONGA
could be a loose cluster plug mine does it occasionaly
if it was a fuse you brumby wouldnt start (the one Im thinking of)
TOONGA
Posted: Mon Jul 01, 2013 7:19 pm
by Brumby boi
thanks i will check them out helps appreciated
Posted: Mon Jul 01, 2013 7:41 pm
by steptoe
A real help would be install the fuses with an LED that glows when it blows . Got a pack of five for, well, marked at $2 but the scanning wasn't working, the clever dip stick behind the counter who gave me a "I'm waiting for you" when I asked if he was ready to go.... entered in the code for charge a misc dollar and charged me two of them, charged me for misc cent , so the five for 2c, rounded down to zip was a nice bit of payback
And the oft not loooked for, loose earth?
Posted: Wed Jul 03, 2013 1:29 pm
by Brumby boi
all good now, i ripped the dash cluster out and found that one of the electrical board link had blown. easy fix and all working now. thanks