The AUSubaru.com.au Forums

Gday, the door on my MY is sagging a good half inch or so, enough to not have the window seal up. Now question is, is it easy to reseat the door? I know you have to remove the front right panel to get to the hinges, can i do all this as a one man team?
Looking to save a bit of money as this thing has cost me too much latley...

Cheers guys

Put a jack under it at the back corner with a block of wood in between, usually a quick easy fix, just do a little at a time of physically lift the door if you are strong enough.

Cheers, Guess i'll tackle it this week then, good idea with the jack.

And make sure the door is as close to closed as possible so it bends the right way, I used to do it to my Escorts all the time.