The AUSubaru.com.au Forums

Does anyone know how to tell what sensor is tripping the alarm?

if its a factor key pad alarm u can pull troble coades by holding *# then turn the key on and if its the glass sensor it will flash 789 if its a door it flashes 456 and bonnet is 123 u can adjust the sensetivety on the module is the door lighton the dash glowing dull becouse that used to be a prob when i used to work for subaru when they were new

cheers for that i ended up going to closes subaru dealer they said it was bonnet/boot/infosonic sensor and they checked the switches and adjusted the sensetivety on it. fingers crossed it fixed it