Page 1 of 1
l series transfer problems
Posted: Sun Oct 04, 2009 6:26 am
by banger
hi all im new to this site nt new to suba's im on my second i have an 89 l series 2" lift on king springs and 27" bfg all terains. had lots of problems of late with a subaru mechanic not being able to do wheel bearings. they have done them 3 times so i did it myself this time.
but the problem i have at the moment is she dont like going into lows. it sometimes goes in better when rolling but its the luck of the draw. any thoughts would be awesome.
Posted: Sun Oct 04, 2009 6:28 am
by banger
and if anyone wants a set of winter treads i have a set of 4 185 70 14" nankangs will fit under non lifted suba.
Posted: Sun Oct 04, 2009 9:53 am
by AlpineRaven
can you tell us more about why she wont get in low gear?
Are the tyres all the same size?
Has the gearbox been changed/or diff (has to be matching ratios)?
Are you on gravel or off surface to get in low range?
Cheers
AP
Posted: Sun Oct 04, 2009 1:57 pm
by openflame06
---- Winter treads are they new?
Posted: Sun Oct 04, 2009 3:33 pm
by banger
it doesnt matter where i am all the tires are the same size and i never used to have the problem. i push the lever up and it is like when you get in between hi and low. hi is fine but its no good to me with 27's. all the gearbox and diff is standard.
and the winter treads have at least 80% left on them
Posted: Sun Oct 04, 2009 3:41 pm
by banger
i'd post a pic but i'm not sure how i only want like $90 for them they are on ebay my user name is malachijj85
Posted: Wed Oct 07, 2009 6:47 pm
by openflame06
Yeah its way too far for me to go otherwise id be keen.
Posted: Wed Oct 07, 2009 9:56 pm
by phillatdarwin
i wood like to tyres but i are in darwin
Posted: Thu Oct 08, 2009 12:01 pm
by El_Freddo
Check the 4wd lever links - there may be a shagged out bush in there somewhere that's not allowing you to select low everytime you want it.
Cheers
Bennie
Posted: Thu Oct 08, 2009 12:57 pm
by TOONGA
