Page 1 of 1
How do I get window winder off 92 brumby?
Posted: Mon Jul 13, 2009 12:42 pm
by kona480
Hi I was just wondering how to do it without braking anything?
Posted: Mon Jul 13, 2009 3:48 pm
by ChPLAT
You need some of those pliers for the butterfly clips. Hit up any automotive place.
Posted: Mon Jul 13, 2009 9:48 pm
by AlpineRaven
What I've done in the past, I've made an small hook type from coat hunger wire, make a small hook just enough to remove the clip without damaging anything, it takes a few practise to do that... Last time I used it was on a VT Commodore 3 months ago..
Cheers
AP
Posted: Tue Jul 14, 2009 10:49 am
by steptoe
$5 to $10 depending on car aprts joint pricing policy for a door handle remover tool. Is just flat metal with a slot cut one end. Shove it on behind handle between trim and push in, wind handle up or down and the spring clip flies off to fall down drain or some other hard to see get at place!!
window winder
Posted: Tue Jul 14, 2009 10:33 pm
by tony
easiest way is to get an old rag like a tea towel or so, drag it behind the handle it will catch on the end of the C clip and pull it off safely.