Page 1 of 1
Liberty Wagon Rear Cargo Window Seals
Posted: Thu Feb 26, 2009 6:30 pm
by egas
I want to know how to get the rubber/steel seals that cover the join between the rear side cargo windows and the bodywork ( at the bottom of the window) off. I am inclined exert pressure but thought I would enquire. These are the seals that hold dirt and moisture and I have noticed very minor surface rust and want to get at it.
It is a 92 LX Wagon.
Thanks in advance for any advice
Posted: Thu Feb 26, 2009 8:00 pm
by Suba
they are cliped down into the quarter panel , just prize up gentley
Mike.
Posted: Thu Feb 26, 2009 10:50 pm
by vincentvega
start at the rear of the car and pop out hte clips moving towards the front of the car
definately worth cleaning out in there before the rust gets too bad
Posted: Sat Feb 28, 2009 6:10 am
by egas
Yes, got them cleaned them, and the rust is nothing much just got to tidy it up thanks for that
Posted: Sun Mar 01, 2009 9:34 pm
by vincentvega
the other spot worth checking is under the rubber seal at the bottom of the rear hatch. If you do much beach work a lot of salt and sand gets flicked up under there